Nano GX
The World smallest HDMI to RGB Converter, with audio and gamma-X Features intergrated
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
in this box is included:
- Nano GX
- RGB to RGB cable
- USB to Mini USB Cable
HDfury I Nano GX Key Features
- World smallest HDMI to VGA converter with Audio output and Gamma-X features integrated.
- Ultra low power consumption 5V from DVI/HDMI or external power supply.
- The brand new HDfury I Nano GX handles all video formats down to SD (480p) and all the way up to Full HD (1080p60).
- Featuring a smart reset switch so you will never have to unplug and replug HDMI cable again, just press the reset button and HPD events is reinitialized.
- A perfect companion for budget projector or small RGB monitor/display.
- Just like any recent HDfury hardware, it comes with USB upgradable firmware that allow you to unleash furious features.
When used in standalone mode (no power supply cord attached) the Nano GX will perform just fine with most HDMI/DVI source devices.
If for any reason the HDMI or DVI source do not provide enough current for the Nano GX to operate correctly, please disconnect the HDMI input cable BEFORE connecting the power supply or power cord.
Specifications:
- HDMI Female Port Input (100% digital).
- A HDMI -> DVI-D cable can be used to connect to an DVI-D(HDCP) source.
- RGB 4:4:4 (8 bits) digital input (every HDMI source MUST be RGB 4:4:4 compatible).
- Mini Jack output for analaog stereo sound.
- Gamma-X feature integrated (read below).
- Compatible with non-HDCP or HDCP sources.
- Compatible with any RGB Display
- Easy to install within a minute. (Plug&Play)
- 10 bits 175MHz triple video DAC – Inter-DAC : 2%
- RGB-H/V Female Port D-SUB 15 Output video analog signals (0,7Vpp over 75 ohms impedance)
- Ultra short Analog links (<1 cm) on the Nano GX RGB 1080p for optimal quality.
- DVI video bandwidth in VGA/RVB outputs: 25-165MHz
- DVI Data Rate – Bandwidth 1.65 Gbps (Single link)
- Maximum resolutions: 1920×1080 or UWXGA (1920×1200) at 60Hz with custom porch settings or SXGA (1280×1024) at 85Hz Computer compatible (PC, Mac)
- HDTV ready (480p/576p/720p/1080i/1080p48/50/60 compatible)
- DVI1.0 compliant / HDMI interoperable and HDCP ready
- HD-DVD and Blue Ray Disc players compatible
- PS3, PS4, X360 Elite and Xbox One compatible
- SAT and CABLE setbox for HDTV channels compatible
- HDCP compatible with embedded keys loaded.
- Energy management : DVI et VESA DPMS compatible.
- Ultra low power consumption in Standby
- Maximum power : 0.4A under 5V (at 165MHz pixel clock)
- On-board DC/DC converter (5V) with extra-low EMI signature
- Power +5V from DVI/HDMI or external power supply
- Green LED to display active digital link.
- Safe cost solution – Single IC solution + external eeprom
- Small size : 57x35x19mm black cabinet
- Shortest RGB analog video link as possible
- Professional factory made (mass-production) using pick/place and reflow/wave solder pro. equipment.
- Gold Plated connectors, tracks and material
- HDfury has a +5v input
- EDID detective feature: EDID eprom can be reprogrammed by your computer through it’s Graphic Card! (This feature is reserved to professionals)
- Warranty: One year warranty
Enhance your display compatibility (lifetime) and value (now compatible with new equipment) HDfury maximum output limit is above the 1080p resolution which makes this device absolutely hassle free to handle 1080p video data flow continuously during years ! HDfury HDMI/DVI-D to VGA signal converter delivers clean video at the highest resolution up to 1920x1080P. It’s an in-line adapter easy to install, connect to any VGA display and run a HDMI/DVI cable to your source. The DDA delivers native resolution video with the internal 1.65Gbps bandwidth, ideal for both PC and AV sources. Home Cinema Addicts: - HDfury is also compatible with the 3 Tubes projectors from Barco such as BD701, BG701, Ciné 7, BG800(s), BG801, BD808(s), BG808(s), BG1208(s)(/2), BG1209(s)(/2), Cine 8 (Onyx), Zenith Pro 1200, Cine 9, Cinemax. It can be hooked on Port 3 (With a VGA female cable -> SUBD9P) or Port 5 (with a VGA female -> 5xBNC cable) - HDfury is compatible with the 3 tubes projectors from NEC (All models) with a VGA female -> 5xBNC cable - HDfury is compatible with the “Matrix” Projector (not HDCP) such as LCD, DLP, SXRD, D-ILA through VGA 15pins
Gamma-X feature included:
- Output: RGBHV HD-15 D-Sub (VGA) Female Connector (direct connection to TV, PJ, monitor).
- Plug-and-play, no extra steps required.
- Adjustable Gamma Boost for restoring lost shadow details.
- Rotary potentiometer for easy Gamma Boost adjustment.
- Supports all standard HD formats and SD formats: 1080p/1080i/720p/etc. in NTSC/PAL/SECAM.
- Supports all PC resolutions including extremely high resolutions such as 1600×1200/100Hz, 1920×1440/60Hz and 2K signals.
- 450Mhz large signal (-3dB) bandwidth for virtually lossless video processing
- Full dynamic range for maximum picture detail at all resolutions
- Precise black levels – no black crush or missing details or washed-out whites